Circle – Three Points

To create a Circle – Three Points surface do the following:

1.Select Support Curve. It can be a path, a route, an open profile, an edge or a sequence of smoothly-joint edges.

2.Select First Guide. It can be a path, a route, an open profile, an edge or a sequence of smoothly-joint edges.

3.Select Second Guide. It can be a path, a route, an open profile, an edge or a sequence of smoothly-joint edges.

4.Select Internal Guide. It can be a path, a route, an open profile, an edge or a sequence of smoothly-joint edges.

5.Change or leave the default values for the parameters determining design accuracy.

6.Confirm the surface creation.